Over time, the rolling hardware that guides a garage door can become misaligned. This causes the door to pull to one side or not run smoothly on the tracks. While it may be safest left to professionals like Garage Door Repair in Chester, minor track and roller adjustments can sometimes remedy the problem without too much trouble. Here’s how to check your door’s alignment and make simple realigning tweaks.
Content
Inspect the Full Travel Area
With the door open about halfway, examine how it sits in the tracks and how it moves as you operate it. It should hang plumb and track centered the whole way up and down without dragging.
Check for Loose Mounting Hardware
Loose bolts or screws where the tracks mount to the wall or ceiling at each end could cause drifting. Tighten any that are loose so tracks stay firmly fixed in position.
Adjust Roller Tension
Rollers may become too tight or loose over time. Loosen their locking nuts slightly and spin rollers to take up slack or add tension as needed so door moves smoothly without friction.
Realign the Tracks if Needed
Twist or adjust track sections if they are noticeably winding in or out. A couple millimeters can make a difference. Use a levels and measure diagonally to check for squareness and plumb on both sides.
Readjust Door Position if Off-Center
With door halfway up, ensure clearance looks even on both left and right sides when closed. Adjust the hinges or tracks slightly left or right if binding occurs on one side. Test runs regularly.
Be cautious if realignment requires large track adjustments or issues persist after tweaking. Seek professional help from someone like “Garage Door Repair in Chester” if you lack the tools or ability. Their expertise optimizes track setups for long-lasting straight door operation.
Elena Mohr is a dedicated home blogger who has been blogging for over six years. She covers everything home related. Elena also loves writing posts about her travels to Europe with her husband and two children.
